QuickLok Dinghy Launching Wheels (Self-Installation)

$399.00 NZD
Installation Method: Self-Installation

A standard order is prepared and dispatched within 1-3 working days. No matter where you are in the world, our door-to-door shipping service brings your order straight to your doorstep. While shipping timeframes may vary, delivery typically ranges from 1-2 weeks.

"The wheels are a big step up from what I have used. I am never selling these. They are much better in sand and make getting up the beach a simpler process." - Ted Ebbing

Line drawing of the True Kit aluminium transom and QuickLok removable dinghy wheels

More about the QuickLok Launching Wheels

With our new QuickLok Dinghy wheels you have even more freedom than ever.  Freedom to easily move your boat along the beach or down the boat ramp.  Freedom to quickly remove them and pack your boat away.  They are designed to be low profile so they sit in behind your transom and don't interfere with your outboard.

Our QuickLok wheels are manufactured in New Zealand from marine grade stainless steel (316).  What this means for you is they don't corrode.  They have a unique release system that takes literally a second to remove them.  There are no aluminium parts to cause bi-metal corrosion which is a common problem, especially around salt water.

The large 265mm diameter wheels will power over most terrain with ease.  A simple self-locking mechanism keeps them in place whether they are in the up or the down position.  In the unfortunate situation that your dinghy flips upside down with the wheels attached in the on water position, the auto-lock system will prevent them from detaching from the boat.

QuickLok Dinghy Launching Wheels - Installed | True Kit

Please note wheels purchased through this accessory option are for SELF-INSTALLATION.  If you would like True Kit to do the wheel installation please choose from our PACKAGE options.

We strongly recommend using a quality sealant like Sikaflex Marine 291 when doing your QuickLok installation.  We also recommend using Nylon washers when installing onto aluminium transoms (like our Discovery models).

Each wheel has 4 strong stainless studs that get mounted onto the transom making the wheels clip on and off the transom with a single push of the locking plate.  While our wheels are perfect for a True Kit dinghy, they can be purchased and fitted to nearly any other brand of dinghy (choose self-fitting option).

Specifications for the QuickLok Dinghy Wheels

All marine grade stainless steel (316)

Unique design by True Kit

New Zealand made by True Kit

Lightweight at 2.9kg per wheel

High quality pneumatic tire smoothing out the bumps

Removable in a couple of seconds

Doesn't inhibit the pack down size of your boat

Very strong to handle the rougher terrain

Low profile - doesn't interfere with your outboard

Load Capacity 100kg per wheel

3 Year Warranty

Simple reliable up-down mechanism

Self locking so won't come off in case of dinghy capsize at sea

No aluminium and stainless bi-metal corrosion

What do our customers say?

Customer Reviews

Based on 75 reviews
Raymond Bishop
Transom wheels

Simply a must for the Discovery catamaran if you wish to optimize its portability.

JulieAnn B
Awesome, almost.

These work great; however, since the first use one of the wheels takes in water and releases it on my garage floor as it leaks and goes flat between each use. They are also quite difficult to inflate due to the short stem which wouldn’t be a huge problem if you didn’t have to reinflate it every single time before you take your boat out. The other wheel has had zero issues.

Hi JulieAnn, this is the first I have heard of this issue but it sounds like the wheel has a faulty valve. We will happily send you a replacement wheel and are sure you will get years of great use out of the Quickloks

Stefan Wels
Quickloc (Winter)

Hi, the wheels seem good, the quality is good, but you could have put ball bearings in there in some way that you can change at regular intervals. Now we have ice on the lake, we've had that for a while, so I haven't tried the wheels in real life if there is any such. After all, I had the honor of paying taxes that surely go towards improving the world, however you now look at what is better. Anyway, best regards.

Thanks for your review Stefan. In our extensive testing we did test a large number of wheel and friction-reducing systems. We found that sand and ball bearings are not a good combination. The solution we ended up with was the most robust and effective solution. Many thanks