Railblaza Sideports - Workshop Installation
Handy Railblaza Sideports (2) are installed on the transom by True Kit. These ports will allow you to clip in rod holders, lights, cup holders or other Railblaza fittings.
We instal these ports using stainless steel 316 fixings and isolated the stainless components from the aluminium transom.
Shipping
A standard order is typically prepared and dispatched within 1-3 working days. No matter where you are in the world, our door-to-door shipping service brings your order straight to your doorstep. While shipping timeframes may vary, delivery typically ranges from 1-2 weeks.
Compatibility
Row content
THE TRUE KIT DISCOVERY ADVANTAGE
The Discovery inflatable catamaran hull has significantly less drag than a typical deep-v hull. This allows for much smaller, lighter, more affordable and more fuel-efficient outboard engines. You need less horsepower to enjoy a thrilling ride
Our in-house design team started with a clean sheet of paper. We have created an incredibly stiff, lightweight structure using unique shapes and quality materials. The triple fold provides strength and direct power transfer from the engine to the boat while also being very light. The whole transom is finished to super yacht level with the AkzoNobel powercoat system.
We strive to keep the weight out of our inflatable boat range to make our dinghies manageable by anyone. Carrying and rowing these boats is a breeze, and for our larger designs we have our exclusive QuickLok Dingy Launching Wheels.
Whether you are using your True Kit as a tender and need to pull it onboard the mothership, or your True Kit is the water-going extension of your caravan, keeping it light is critical. The secret is in our thermo-welded seams and superior fabrics, which help us to remove all unnecessary weight from the boat.
Our Discovery range all have the extra layer of protection on the bottom of the tubes. This helps to give you peace of mind when sitting the boat on the beach or boat ramp.
The seam can be an inflatable boat's Achilles Heel - or the strongest part. We choose to thermo-weld the seams on our boats to create the strongest bond available (a permanent mechanical bond). A welded seam on a True Kit inflatable actually becomes stronger than the fabric itself. Don't settle for glued seams.
True Kit partner with Railblaza to bring you the Ribports installed on the tubes of every True Kit. You can clip in oars, rod holders, lights and many other fittings into these ports.
Quality and durability were uppermost in our minds when we were choosing the materials for the True Kit range. After extensive research and testing we chose the world’s leading, premium fabric for inflatable boats - Valmex® by Mehler Germany.
•Mehler has over 60 years’ experience in the development of textiles
•Mehler uses the most advanced technology to ensure their high quality, German made textiles are longer lasting
•The Valmex® fabric demonstrates superior flexibility, elasticity, airtightness and resistance against mechanical damage and UV
•Valmex® is recyclable
•Manufactured in Germany under the internationally recognised standard of quality: ISO 9001:2008
Experience what we call "stand up stability". The nature of inflatable catamarans means all the buoyancy is on the outside. This provides an incredibly stable platform for stepping in and out of the dinghy.
- True Kit Discovery - Inflatable Catamaran Landing Craft
- Railblaza Removable Rod Holder (Black)
- QuickLok Dinghy Launching Wheels (Self-Installation)
- True Kit Tactician - Inflatable Fishing Kayak 3.5m
- True Kit Navigator - Lightweight Catamaran Yacht Tender
- The Stowaway - Portable Inflatable Dinghy
- Permatrim Performance Foil
Nulla non elit tempus felis tempus feugiat nec ac libero.
| Models |
Model
discovery 280
|
Model
discovery 330
|
Model
discovery 400
|
|---|---|---|---|
| Colour Options |
Colour Options
|
Colour Options
|
Colour Options
|
| Performance |
Performance
length
280cm/9'6"
weight
31kg/68lbs
packed-down
Boat Bag 100cm x 65cm x 35cm (39" x 26" x 14") beam
150c,/4'11"
max outboard
8
|
Performance
length
280cm/9'6"
weight
31kg/68lbs
packed-down
Boat Bag 100cm x 65cm x 35cm (39" x 26" x 14") beam
150c,/4'11"
max outboard
8
|
Performance
length
280cm/9'6"
weight
31kg/68lbs
packed-down
Boat Bag 100cm x 65cm x 35cm (39" x 26" x 14") beam
150c,/4'11"
max outboard
8
|
| Additional Specs | |||
|
Capacity
430kg/948lbs
Seats Supplied
1 (1 seat position)
Inside Beam
60cm/2'
Tube Diameter
46cm/1'6"
Transom Spec
Aluminium
Scupper System
Shutoff Value
Floor
High Pressure Air
Air Chambers
4+1
Shaft Length
Short
|
Capacity
430kg/948lbs
Seats Supplied
1 (1 seat position)
Inside Beam
60cm/2'
Tube Diameter
46cm/1'6"
Transom Spec
Aluminium
Scupper System
Shutoff Value
Floor
High Pressure Air
Air Chambers
4+1
Shaft Length
Short
|
Capacity
430kg/948lbs
Seats Supplied
1 (1 seat position)
Inside Beam
60cm/2'
Tube Diameter
46cm/1'6"
Transom Spec
Aluminium
Scupper System
Shutoff Value
Floor
High Pressure Air
Air Chambers
4+1
Shaft Length
Short
|
|
| Warranty | |||
|
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nulla condimentum mi vel augue hendrerit imperdiet. Quisque sed velit suscipit, tempus tortor vitae, tristique metus. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nulla condimentum mi vel augue hendrerit imperdiet. Quisque sed velit suscipit, tempus tortor vitae, tristique metus. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nulla condimentum mi vel augue hendrerit imperdiet. |
|||
It has that joy-ride, hair-in-the-wind experience that leaves you wanting to get out in the boat all the time.
Less drag
Less fuel
More speed
WHAT'S IN EVERY TRUE KIT
Premium Valmex® fabric
Dedicated to true quality, we only use German-made UV-resistant Valmex®.
Precision thermo-welded seams
Welded, not glued, creating an unbreakable bond built to outperform and outlast the competition.
Ultra rigid AirDeck
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Proin sed.
WANT TO KNOW MORE?
What's in the box?
With your Discovery, you'll get:
Boat
Floor
Aluminium Seat
2-piece Aluminium Oar Set
Boat Bags
True Kit Bravo Hand Pump
Repair Kit
Is it ok to fold and unfold the boat multiple times?
Yes. We specifically designed our entire True Kit range with folding the boats up in mind. This is one of the reasons we use the highest quality fabrics and construction available. Cheaper fabrics lose their flexibility and durability over time compared to Valmex® which maintains its suppleness over years of use.
What is the difference between the Navigator and Discovery Models?
Both boats share exactly the same materials and construction methods. The designs also share a similar catamaran platform which offers superior stability and performance when compared to conventionally designed inflatables. The main difference is in the bow section. The Navigator is primarily designed for yacht tender purposes and has a high volume tube running all the way around the bow. This means you can load the dinghy up with more people and gear and have them close to the bow. The Discovery has parallel tubes which are tapered towards the bow. This creates less volume in the bow area which increases performance and also allows the bow to be pushed close to the water when weight is placed there.
What gurantee do you offer?
We offer a 5 year limited warranty on new boats. Warranty terms can be found in the Warranty page on our websiteTrue Kit Warranty. Actually, boats built with Valmex® 20 years ago can still be seen zipping around demonstrating exceptionally long life expectancy.
Please read our frequently asked questions to find out more.
WHY WE'RE DIFFERENT
Our commitment to producing outstanding inflatable boats has created the head-turning True Kit Discovery, which is clearly no ordinary inflatable boat.
